Fertilizing, seeding, spraying and filming machine, supporting peanut seeding and filming machine of walking tractor. With its compact, reasonable and full-featured structure, the machine can complete agronomic techniques such as ridge planting, seeding, soil covering, spraying, film spreading, film pressing, and soil building on the film.
Peanut ridging film mulching machine mechanization technology is a mature agricultural mechanization technology to increase yield, which is welcomed by farmers, but how to implement it safely and effectively has great knowledge. Now I will show you how to use the peanut covered planter for your reference.
Preparation before operation of ridging film mulching machine and laminating machine connect the whole ridging and laminating machine with small four-wheel tractor (8.8-1.32kw small four-wheel tractor in general) by three-point suspension, and connect the air pipe of the cartridge with the air pump of the tractor. Check and adjust the lubrication, fastening and rotation of all parts of the ridging and laminating machine.
According to the requirements of the seed metering device, add appropriate seeds to the ridge ridging film mulching machine. When the seeds are too large and too small, they should be picked out. When seed dressing agent is needed, pour the seeds on a 1-meter square plastic film, pour the original solution of the seed dressing agent, shake the two corners evenly, dry for 1 hour, check whether there is any foreign matter in the seed box, and add seeds. When a new variety is replaced, the seed metering device can be pulled open, the remaining seeds can be poured out and added again.
Add and replace the liquid medicine, mix the liquid medicine according to the requirements, pour it into the liquid medicine cylinder, open and close the air inlet valve to inflate the cylinder, make the air pressure reach the specified value, and then try to spray. Pay attention to adjust the safety valve to the safety pressure to ensure the safety. When changing the liquid medicine, loosen the cylinder cover to release the air, and then open the cover to add the medicine.
Adding fertilizer will remove the debris and add the granular fertilizer without hardening into the seed box.
The ridge laminating machine is installed with plastic film to install the film roll on the film rod, install it on the film roll frame, and adjust the tightness well for locking.