Corn Lodging Machine Harvest? Try These Methods

In the short time of autumn harvest, farmers'friends need to harvest corn in time. Recently, some people consulted Xiaobian about the operation of agricultural machinery for rapid corn harvesting. In recent years, we have sorted out some quick harvesting methods of corn harvester.

From the point of view of agricultural machinery, the following aspects can be modified and adjusted to minimize losses.

Firstly, the improvement of harvester equipment is mainly to improve the fluidity of maize lodging feed.

According to the data, there are three ways to improve: 1. Roller support device 2. Chain auxiliary feeding device 3. Finger auxiliary feeding device. At the same time, strict matching of turf and grass heading is very important for the harvesting efficiency and loss of corn combine harvester.

Secondly, the harvester parts adjustment:

1. Adjusting the air volume of the harvester as far as possible to make the corn harvested cleaner, which is conducive to reducing the possibility of corn mildew under lodging conditions;

2. Adjust the speed of threshing drum and indentation clearance to avoid excessive friction, resulting in water in stems and leaves into grains.

Third, improve the operation methods. In the process of operation, according to the lodging direction of maize, the back-harvesting method is beneficial to the feeding of straw and the reduction of stalk loss.

Because there is no measured data, it is necessary to measure the loss and corn cob loss according to the actual situation. The final decision is reciprocating harvest or one-way reverse harvest. Considering that the humidity of lodging maize will exceed its normal growth state, reducing the walking speed, making it adapt to the feed speed and threshing speed, will be conducive to achieving the best operation state and prevent the occurrence of blockage.

Fourthly, we should reasonably choose the working time and try our best to wait for dew to subside before harvesting.