You Don'T Know The Secrets About The Farm Corn Combine Harvester

The maintenance of the farm corn combine harvester on the farm is very important. Careful and timely technical maintenance can keep the combine in good technical condition, give full play to the efficiency of the machine, improve production efficiency and prolong the service life. Therefore, the farm corn combine without technical maintenance should not work.

The following 13 points are the precautions for the maintenance of the farm corn combine harvester on the farm:

01. Before working every day, the farm corn combine harvester must thoroughly clean the remaining chaff, broken stems and other attachments on the machine. In particular, the chaff, awn and other attachments in the cylinder, concave, shaking plate, cleaning screen and the key body of the document follower should be completely removed.

02. Check whether the cutter of the farm corn combine harvester on the farm is damaged and whether all parts are fixed. If any fault is found, remove it in time.

03. Check whether the bridge chain harrow is loose and properly tensioned.

04. Check whether the cylinder bar, concave and cylinder bearing are loose.

05. Check the fixation and clearance of the key body on the wooden bearing.

06. Check and adjust the tension of the chain and V-belt of the farm corn combine harvester and the fixation of the axle.

07. Check the oil level of the oil tank of the hydraulic system, all joints, and the connection and fixation of the flange plate. If any leakage is found, repair it in time.

08. Check the oil level of the engine oil pan and fuel tank high-pressure oil pump and the water level of the water tank, and add if necessary.

09. Check the connection and insulation of the electric circuit of the corn combine on the farm, and remove any damage and poor contact in time.

10. Check the guard plate at the roller inlet, the front plate of the step plate and the hole covers of the threshing part. Sealed rubber plate and other sealing conditions shall be free of grain leakage.

11. Check the reliability of the steering wheel and brake mechanism of the farm corn combine.

12. During the operation of corn combine on the farm, pay attention to whether the oil temperature, oil pressure, ammeter, water temperature and safety clutch indicator work normally.

13. After the daily work of the farm corn combine harvester on the farm, the grain in the grain tank, the grain inside the machine and the grass in the grass collecting truck shall be unloaded. The cooling water of the engine and the oil in the oil pan shall be drained or replaced in time according to the requirements of the engine manual.