Maintenance Method Of The Header Part Of The Farm Corn Combine Harvester

The header is a very important part of the farm corn combine harvester. It not only straightens the upright or fallen crops, but also transports the crops to the threshing drum as required, so the maintenance of the farm corn combine harvester header is particularly important.

The farm corn combine harvester header must be carefully inspected and maintained before operation:

Static inspection of the farm corn combine harvester: remove the weeds of each part, check whether the gap between each part meets the specified requirements, whether the tightening condition is good, whether the meshing position of the reel star wheel is correct, whether the finger of the reel is excessively worn, if necessary The lubricant should be replaced and filled in time.

Dynamic inspection of the farm corn combine harvester: check whether the transmission of each part is normal, whether there is jamming, whether there is any abnormal sound, whether the header lifting is normal (hydraulic lifting system and electrical system), and adding lubricating oil to the moving part.

In the inspection of the farm corn combine harvester, the problem should be adjusted or replaced in time, and it must not be taken lightly. After the problem is completely resolved, the operation can be put into operation after confirming that it is correct to ensure the normal operation of the small corn harvester.