Experts Teach You How To Overhaul The Walking Mechanism Of A Farm Corn Combine Harvester

The farm corn combine harvester has the characteristics of good performance and high working efficiency, and is very popular among farmers. Because the high performance farm corn combine harvester is expensive and the maintenance cost is also high, in order to make the majority of operators make better use of the farm corn combine harvester To improve operation efficiency, Shandong Weixin’s experts have deliberately summarized some technical articles about farm corn combine harvester.

Today I Will Share With You The Walking Mechanism Of Farm Corn Combine Harvesters:

Lubricate the bearings of the driving wheels, supporting wheels, balance wheels and guide wheels of the walking part of the farm corn combine harvester before operation.

Check the wear of each part of the farm corn combine harvester and the tension of the track, pay special attention to the wear of the drive wheel of the farm corn combine harvester (if it is worn too much, it will cause damage to the cover), and remove the soil and weeds in each part.

According to regulations, the farm corn combine harvester must be filled with oil every 500 hours of work, and replaced after 1000 hours. But in actual use, some corn combine harvesters have bearing damage after working for hundreds of hours. If they are not found in time, it will soon damage the bushings on the farm corn combine harvester bracket. Repairing is more troublesome, so check the corn When combining harvesters, you must be careful and meticulous, and solve problems promptly when you find them.