Correct Operation Of Farm Corn Combine Harvester

1, Farm Corn Combine Harvester in the long-distance walking or transportation process, should be attached to the header and the chopper on the rear suspension frame, driving at medium speed, in addition to a driver, other parts are not allowed to take the staff.

2. Before harvesting, the driver should understand the basic conditions of the work site, such as the terrain, crop varieties, row spacing, maturity, lodging, whether there are stones in the land, and unformed trenches, whether it is possible to collapse Place of the car etc. Should choose to stand upright or lay lighter harvested fields. Ears that have fallen heavily before harvest and corn ears at both ends of the plot are taken off and shipped out, and then mechanical harvesting operations are performed.

3. Before Farm Corn Combine Harvester enters the work area, it shall be tested again, and the engine speed shall be stabilized at the normal working speed before work can begin. Overspeed work is strictly prohibited.

4, can first use the low 1 block to try to harvest, and open a lane in the middle of the ground, and cut out the ground to facilitate the unloading of food vehicles and personnel through the unit and turning.

5, normal test, can be an appropriate increase in a gear operation. After a period of operation, the quality of the harvest should be checked and the appropriateness of the adjustments at each site should be observed.

6. The driver should flexibly operate the hydraulic handle so that the header and cutter can adapt to the terrain requirements, and avoid the crusher hammer claws hitting the soil. The abutment device and the picking roller impact the hard object and cause damage.

7. When the Farm Corn Combine Harvester works to the ground, do not immediately reduce the throttle, and continue to keep the working parts working so that the straw is completely crushed.

8, when the engine cooling water temperature is too high, should stop cleaning the radiator, and add cooling water in a timely manner, but do not immediately open the tank cover, so as not to burn personnel, should be cooled for some time or take protective measures, then open the tank lid, add cooling water.