Farm Corn Combine Harvester Operators Must Master The Fire Prevention Measures

Farm Corn Combine Harvester are emerging agricultural machinery and equipment in recent years. Its appearance has caused farmers' friends to bid farewell to traditional manual harvesting methods for thousands of years, which has greatly reduced the labor intensity of farmers' friends. In the operation of machinery and equipment, safety should be the first, so the operator must fully grasp the knowledge of the safe operation of the Farm Corn Combine Harvester. When the Farm Corn Combine Harvester is harvesting, the weather is hot or the weather is dry. If there is slight negligence, a fire can easily occur, causing a serious safety accident. In order to prevent the occurrence of Farm Corn Combine Harvester fire accident, the following points should be noted:

1. Before the Farm Corn Combine Harvesteris put into the harvesting operation, the Farm Corn Combine Harvester must carefully repair and maintain. According to relevant regulations, the “five nets” (oil, water, gas, machinery, tools) and “four leaks” (oil, water, gas, and electricity) should be implemented. "Six closed" (diesel tank port, gasoline tank port, oil filling port, carburetor, magneto, oil inspection port), "one good" (technical state), at the same time, keep the engine and fuel tank clean, without gasoline Wipe grease.

2 The electrical circuit away from heat, with a clip fixed firmly through the moving parts of the wire, the middle span of the wire shall not be too long or too short, to prevent the rotation or vibration caused by wire wear, scratches exposed, grounding iron fire.

3. Always check the start-up time of the gasoline engine to prevent the carburetor from tempering when working in the field. It is advisable to install a qualified Mars collector for the engine.

4. Always check the working conditions of the fuel injectors and high-pressure oil pumps, as well as the quality of air filters, exhaust pipes, and fuel, and repair or replace them if necessary.