Notice On The Use Of Potato Harvester

Notice On The Use Of Potato Harvester

1, if the soil moisture should be increased in a timely manner slope; if it is sandy land then the slope to be reduced, according to the soil can be lifted the shaker.

2, such as the screen bar broken damage to replace as soon as possible to ensure the safety of workers, gear wear is too large, the replacement must be carefully checked, clean the inside of the box, remove all kinds of debris, add clean gear oil, reduce gear bearings and other components Wear.
3, the machine must pay attention to whether the use of screws at all parts of the loose, the new machine in the work of 2-3 hours to check again is normal; every 8 hours to check again; 500 hours of work must be replaced gear oil and butter; Adjust the screen once, adjust the sieve bar loose to have a certain tightening force, so that the screen bar and the wiper wheel driven by a good, smooth transmission, or the screen bar wear and tear will produce a sagging, affecting the normal engagement, resulting in "climbing chain " Worn even pull, serious and even broken screen bar, turn wheel. Follow-up wheel in the inspection and maintenance should pay attention to the wheel teeth, the upper and lower shaft bearing wear at both ends of the situation. Wear serious should be repaired or replaced, to prevent the upper and lower shaft axial movement too large.
4, the work can be allocated to the side of the potatoes, so as to avoid the hand wheel when the accident injury. Harvesting work over the ridge, trench turned to mention the harvester, should be slow down when the tractor suddenly increased the load, leaving the screen by the impact of the load is too large to produce fracture.
5, regularly check the butter and oil seal when using the No. 2 composite calcium-based grease, so as not to premature wear.