How to Check Ridging Film Mulching Machine

1, Adjust the ;suction fan of Ridging Film Mulching Machine fan to check the high-speed parts; also make sure the fan clutch is normal, the rotation should be flexible, to be able to normally forward combination, reverse separation; with the normal working speed Check the sucking tube suction, suction weak when checking the belt tightness, belt tension adjustment through the fan up and down the overall position to achieve.
2, Ridging Film Mulching Machine width check adjustment of the coating mechanism is divided into three independent monomer, the center of each monomer must be consistent with the center of each ridge, the center of the monomer spacing of 1.34m; The center line of the film roll is parallel to the centerline of the machine and the height of the film roll should be adjusted to 1.0 ~ 1.5cm from the ridge surface. The distance is too large to affect the film effect in the windy day. Or broken to create breathable. The thickness of the film can be 8 ~ 10μm, the width of optional 60 ~ 70cm, generally 134cm large ridge selection 65cm plastic film is appropriate, too wide waste, too narrow to reach the film standard.
3, Ridging Film Mulching Machine structure of the adjustment check. Check the seed plate to see if it is suitable for the crop to be selected seed plate, seed row hole must be clean and no rust; check the seeder clean plastic teeth is intact, damaged To be replaced in time. Coated soil coating device to debug a good angle for the front outward angle of about 40 °, the depth of 5 ~ 7cm into the soil is appropriate, the operation can be carried out according to the amount of casing and then the specific adjustments.