Ways to Eliminate Threshing of Farm Corn Combine Harvester?

Farm Corn Combine Harvester The threshing part of the main inspection of the threshing drum and the concave plate, if used in the course of improper operation, will produce uneven wear. Wear light, you can adjust the work by reducing the gap to reduce the work performance, then we should be how to effectively eliminate these failures, then for everyone to elaborate below:
Separation and cleaning of the equipment:
(1) Check the gap between the documentizer and the side wall. Should not less than 5 mm gap, adjacent to the gap between the two key boxes can not be less than 2 mm, should also pay attention to the feeder bearing (wood bearing) gap.
(2) check the paperizer. To see if there is any damage to the side of the box box, the corrector crankshaft, the key box is deformed, the documentor deformation will destroy the original correct trajectory of the key surface, reduce the separation effect. With the ruler to measure the distance between the front and rear journals, the measured distance is not, then that has been deformed, and then specifically determine the deformation of the deformation of the site pressure correction. Work should always check the corn combine harvester keypad and key box inside, there can be no clogging phenomenon, to prevent the loss of grain.
(3) cleaning room cleaning. In order to reduce the impact of the movement of the screen box, the drive mechanism is connected with rubber bearings (rubber sleeve), rubber bearing aging loss of elasticity or damage, the impact of increased, should be replaced. Sieve box of fish scale sieve broken can be repaired. Remove the bad sieve from the shaft and replace it with a new sieve and sieve. Check whether the upper and lower sieve plate adjustment mechanism is effective, corn combine harvester work can not be due to vibration to close the sieve.
Farm Corn Combine Harvester This part is mainly used in this way. We must follow the instructions to do the correct operation, so that the performance can be fully demonstrated, effectively extend its service life, if you have any questions, please feel free to consult with us The