In-Depth Understanding Of The Farm Corn Combine Harvester

The small farm corn combine harvester is mainly composed of ear picking mechanism, ear box, straw cutter, and straw supporter.

When the farm corn combine harvester is in operation, the small corn harvester is in the direction of the corn ridge, and the straw lifter will straighten the corn plants. The corn plants are picked with the reeling wheels rotating oppositely. Under the action of the wheel picking plate, the ear stalks are pulled. Off.

Due to the effect of the height difference between the inside and outside of the farm corn combine harvester, the ears fall into the ear box, and the ear box is filled and piled up out of the box. With granary type, the fruit ears are sent to the granary above the rear of the tractor by a conveyor belt. The high-speed rotating cutter cuts the straw from the root and sends it to the crushing mechanism to be shredded into 4-6cm-long pieces, and the chopped straw is sprinkled naturally.

The rotary trajectory of the corn harvesting motor knife is 8cm from the ground. The shorter the distance, the greater the power consumption and the better the crushing effect. The best operating speed of this machine is 40 meters per minute, and it is generally driven at a constant speed by the first gear.

When the farm corn combine harvester harvests corn, the small corn harvester should increase the throttle to ensure that the engine speed is 1800/per minute to avoid clogging of the corn stalks.

If it is blocked, pull down the clutch to stop the rotation of the farm corn combine harvester, check whether the belt is stretched, and whether the tensioner is loose. When the tractor harvests corn cobs about 10 meters away, step on the switch of the ear storage box for 3 seconds, the corn will naturally fall into piles on the ground, loosen the corn storage box to close, and the operation can be completed without stopping the machine.