• Trademark
  • Agricultural Machinery
  • Reel Sprinkler
  • Potato Planter
  • Agriculture UAV Drone
Important NoticeDear customers,please pay the bill directly to the company accounts while in the purchase. We haven't liability for any loss whatsoever arising by other accounts.

News Categories

Technology Wiki

Maintenance Of Farm Corn Combine Harvester Before Storage

After several days of continuous operation, there will be a large amount of dust and dirt inside the farm corn combine harvester, accompanied by different degrees of wear and tear of parts. Therefore, after the end of the harvest season, scientific maintenance must be carried out for the farm corn combine harvester, which can not only prolong the service life of the farm corn combine harvester, but also reduce the failure rate of the farm corn combine harvester in the next year.

(1) Clean the farm corn combine harvester carefully. When cleaning the machine, first open the inspection hole covers of all parts of the machine, remove all protective covers, remove the remaining debris in the roller chamber and the bridge conveying chamber, and clean the straw weeds and soil debris in the shaking plate, the bottom shell of the cleaning chamber, the inside and outside of the fan volute, the outside of the gearbox, the header, the bridge, the engine outer surface and other parts. After cleaning, start the farm corn combine harvester, let each part run at high speed for 5min, discharge all kinds of residues, wash the outside of the machine with water, and then start the machine to run at high speed for 3-5min to remove the residual water, and store it after drying.

(2) All filters and radiator plates need to be cleaned . It is necessary to carefully check whether the oil quantity in the gearbox and the hydraulic oil of the hydraulic device are sufficient and whether they need to be replaced. Loosen the tension devices such as conveyor belt, chain, spring and strand belt

(3) Check the traveling clutch, main clutch friction plate and release bearing, observe whether the wear of each group of clutches and bearings is serious, and adjust or replace them if it affects the farm corn combine harvester future work. To remove each spherical bearing, fill lubricating oil from the small hole of the bearing.

Maintenance Of Farm Corn Combine Harvester Before Storage

Product Categorymore

Newsmore

Seed Technologymore

About Usmore